Planar VSS17SX User Manual
17" VitalScreen S
14
QUICK LINKS
GETTING STARTED
INSTALLING THE DISPLAY
USING THE CONTROLS
APPENDIXES
Function Menus
Monitor–Control Menu
Monitor-Control. Allows you to adjust the display characteristics.
Adjust these settings when Auto Adjust results are unsatisfactory.
Adjust these settings when Auto Adjust results are unsatisfactory.
Pressing Adjust PLUS or MINUS displays the Monitor-Control submenu.
Use the Function LEFT or RIGHT button to select a submenu item.
Use the Function LEFT or RIGHT button to select a submenu item.
Auto-Adjust. Select Auto-Adjust to set the display parameters to
optimum values.
optimum values.
H-Position. Press Adjust PLUS or MINUS to move the display image
left or right on a horizontal plane.
left or right on a horizontal plane.
V-Position. Press Adjust PLUS or MINUS to move the display image
up or down on a vertical plane.
up or down on a vertical plane.
Phase. Press Adjust PLUS or MINUS to fine-tune the display image.
Clock. Press Adjust PLUS or MINUS to adjust the display pixel
number alignment.
number alignment.
Reset. Press Adjust PLUS or MINUS to reset all the Monitor-Control
submenu settings.
submenu settings.
Graph/Text. Press Function Enter to switch between the text and
graphic options.
graphic options.
Port-Select. Switch between analog and digital mode; if no signal
comes the Auto-Detection function is activated.
comes the Auto-Detection function is activated.
Exit. Press Adjust PLUS or MINUS to exit the submenu.