Pelco FR85011 User Manual
24
C1642M-A (1/05)
Troubleshooting
LED indicators on the front panel of the FT85011 transmitter/FR85011 receiver (refer to
Figure 2) allow you to monitor signal status, data activity, and operating power. Table C pro-
vides information about the front-panel indicators and associated troubleshooting guidelines.
Figure 2) allow you to monitor signal status, data activity, and operating power. Table C pro-
vides information about the front-panel indicators and associated troubleshooting guidelines.
Table C.
Troubleshooting with Front-Panel Indicators
Indicator Color
Meaning
Possible Cause
Corrective Action
Power LED (Pelco badge)
Blue Pelco logo lights. Power is being applied
to the module.
–
No action required.
Blue Pelco logo does
not light.
not light.
Power is not being
applied to the module.
applied to the module.
Power connection is
faulty.
faulty.
Check power
connection. If module is
rack mounted, reseat
module or power supply
as necessary.
connection. If module is
rack mounted, reseat
module or power supply
as necessary.
Power supply has failed. Replace power supply.
Loss of power occurs
due to tripped circuit
breaker(s), blown
fuse(s), or faulty
electrical service.
due to tripped circuit
breaker(s), blown
fuse(s), or faulty
electrical service.
Check circuit breaker(s),
fuse(s), or electrical
service as necessary.
fuse(s), or electrical
service as necessary.
Video Present LED
Green
Incoming video signal is
present on the channel.
present on the channel.
—
No action required.
Red on transmitter
Incoming video signal is
not present on the
channel.
not present on the
channel.
Video source is not
powered on.
powered on.
Check power connection
to the video source.
to the video source.
Video source is not
connected to the
transmitter.
connected to the
transmitter.
Check BNC connections.
Coaxial cable is
defective.
defective.
Replace cable.
(Continued on next page)
C1642M-A FT85011.book Page 24 Wednesday, January 19, 2005 12:46 PM