Maytag bravos mtw6700tq User Manual

Page of 56
17
To use or change Rinse & Spin setting:
1. 
Turn knob to RINSE & SPIN until the Rinse & Spin indicator light glows.
2. Press START.
Spin Only
Spin Only may help shorten drying times for some heavy fabrics or special-care items. Spin 
Only may also be used for draining the washer after canceling a cycle or completing a cycle 
after a power failure.
To use or change Spin Only setting:
1. 
Turn knob to SPIN ONLY until the Spin Only indicator light glows.
2. Press START.
Clean Washer
Use the Clean Washer cycle once a month to keep the inside of your washer fresh and clean. 
This cycle uses a higher water level. Use with AFFRESH™ washer cleaner tablet or liquid 
chlorine bleach to thoroughly clean the inside of your washing machine. This cycle should 
not be interrupted. See “Cleaning Your Washer.” 
IMPORTANT: Do not place garments or other items in the washer during the Clean Washer 
cycle. Use this cycle with an empty wash drum.
Modifiers
Modifiers allow you to further customize your cycles and save energy.
Soil Level
Soil level (wash time) is preset for each wash cycle. See “Preset Cycle Settings” in “Cycles.” As 
you press the Soil Level pad, the cycle time (minutes) will increase or decrease in the 
Estimated Time Remaining display and a different wash time will appear. To get the minimum 
wash time, press the pad until the indicator light next to Light illuminates. This is the shortest 
wash time available for that cycle. 
For most loads, use the time recommended in the preset cycle settings.
For heavy soil and sturdy fabrics, press Soil Level to select more wash time, if needed.
For light soil and delicate fabrics, press Soil Level to select less wash time, if needed.
Spin Speed
This washer automatically selects the spin speed based on the cycle selected. The preset 
speeds can be changed. Spin speeds may vary by cycle. 
Wash/Rinse Temp
Select a water temperature based on the type of load you are washing. Use the warmest wash 
water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads drier and more comfortable to handle than cold rinses. However, 
warm rinses also increase wrinkling. Cold rinses may help with wrinkling and save energy. 
Temperature Guide
NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. 
Soils may be difficult to remove. 
Auto Temp Control
Auto Temp Control (ATC) electronically senses and maintains a uniform wash and rinse water 
temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned On 
when a cycle is selected. (See “Preset Cycle Settings” in “Cycles.”)
ATC is available with Warm/Warm, Warm/Cold and Cool/Cold settings. The water 
temperature in the Hot/Cold and Cold/Cold settings depend on the water temperature at the 
water inlet faucets.
ATC ensures consistent cleaning.
Heated water consumes the largest amount of energy that a washer uses.
Today’s detergents work well at temperatures above 60°F (15.6°C). 
Delay Wash
You can use the Delay Wash feature to delay the start of a wash cycle for up to 10 hours 
(depending on your model). 
1. Load the washer and fill the dispensers.
2. Close the washer lid.
3. Press POWER.
4. Select the desired Cycle, Modifiers and Options.
5. Press DELAY WASH. 1H (one hour) will be displayed in the time display window. The 
indicator light for Delay Wash will glow.
6. For a longer delay time, press DELAY WASH. The Start time will increase by 1-hour steps.
Wash Water Temperature
Suggested Fabrics
Hot
Whites and pastels
Warm
Bright colors
Cold
Colors that bleed or fade