Konica Minolta 4030-7764-02 User Manual
5
5.6 Loading Paper
5-12
Di2510/Di3010/Di3510
Copy
P
ape
r
Cha
p
ter 5
3
Load the paper into the left side of
the drawer so that the front side of
the paper (the side facing up when
the package was unwrapped)
faces up.
the drawer so that the front side of
the paper (the side facing up when
the package was unwrapped)
faces up.
Loading Paper Into the Multiple Bypass Tray
Use the multiple bypass tray when printing on plain paper, postcards, envelopes,
overhead projector transparencies and label sheets.
overhead projector transparencies and label sheets.
Copying onto the lower side of the set paper.
✎
Note
To set paper other than plain paper, settings must be made in the panel.
To set paper other than plain paper, settings must be made in the panel.
While a copy job is being printed or queued, the paper size for the multiple by-
pass tray cannot be set.
pass tray cannot be set.
In addition, the “OHP Interleaving” function cannot be set at the same time.
To load plain paper
1
Open the multiple bypass tray.
When loading large-sized paper,
open the tray extension.
open the tray extension.
Tray extension