GE LTC MAP User Manual

 
3-6 

Jumpers JP18 and JP19 set the annunciator relay outputs to normal or 

inverted.  Jumper JP13 configures the 

button. Refer to 

Table 3-3 for jumper positions.  Refer to Figure 3-3 for jumper locations. 

NOTE: JP13 must always be installed. 

Table 3-3: Alarm Configuration 

JP18 

INV 
NORM 

Annunciator 1 Output Inverted. 
Annunciator 1 Output Normal. 

JP19 

INV 
NORM 

Annunciator 2 Output Inverted. 
Annunciator 2 Output Normal. 

JP13 

Installed 
Removed 

Configures the Alarm Acknowledge button for use. 
Not applicable. 

Jumpers JP10 and JP14, when installed, are set to earth ground.  These 

jumpers must always be installed for accurate and safe operation. 

WARNING: Jumpers JP10 and JP14 must always be installed for accurate 

and safe monitor operation.