Motorola mototrbo xpr 6350 User Manual
Advanced Features
English
17
Starting and Stopping Scan
Procedure:
1
Press the programmed Scan button.
OR
Use the Channel Selector Knob to select a channel with
Auto Scan enabled.
OR
Use the Channel Selector Knob to select a channel with
Auto Scan enabled.
2
When Scan is enabled, the LED blinks yellow and you hear
a positive indicator tone.
OR
When Scan is disabled, the LED turns off and you hear a
negative indicator tone.
a positive indicator tone.
OR
When Scan is disabled, the LED turns off and you hear a
negative indicator tone.
Responding to a Transmission During a Scan
During scanning, your radio stops on a channel/group where
activity is detected. The radio stays on that channel for a
programmed time period known as “hang time”.
activity is detected. The radio stays on that channel for a
programmed time period known as “hang time”.
Procedure:
1
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
your mouth.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
releases the PTT button, indicating the channel is free for
you to respond.
2
Press the PTT button during hang time. The LED lights up
solid green.
solid green.
3
Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
clearly into the microphone.
4
Release the PTT button to listen.
5
If you do not respond within the hang time, the radio returns
to scanning other channels/groups.
to scanning other channels/groups.
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.
This capability does not apply to the channel designated as the
Selected Channel.
Selected Channel.
Procedure:
1
When your radio “locks on to” an unwanted or nuisance
channel, press the programmed Nuisance Channel Delete
button until you hear a tone.
channel, press the programmed Nuisance Channel Delete
button until you hear a tone.
2
Release the Nuisance Channel Delete button. The
nuisance channel is deleted.
nuisance channel is deleted.
NAG-LACR-EMEA.book Page 17 Wednesday, April 30, 2008 5:11 PM