Motorola mototrbo xpr 6350 User Manual

Procedure: 
To restore the deleted nuisance channel, do one of the 
following:

Power the radio off and powering it on again, OR

Stop and restart a scan via the programmed Scan button, OR

Change the channel via the Channel Selector Knob.

You can turn on or off the ringing tones for a received Private 
Call (see Turning Radio Tones/Alerts On or Off on page 24). 

Your radio can be programmed by your dealer to continually 
alert you when a radio call remains unanswered. This is done 
by automatically increasing the alarm tone volume over time. 

This feature is known as Escalert.

Call Alert paging enables you to alert a specific radio user to call 
you back when they are able to do so. This feature is accessible 
via a programmed One Touch Call button.

Procedure:
When you receive a Call Alert page:

You hear a repetitive tone. The LED blinks yellow.

Press and release the PTT button to acknowledge the alert.

Press the programmed One Touch Call button to make a 
Call Alert to the predefined ID.

The LED lights up solid green when your radio is sending 
the Call Alert.

If the Call Alert acknowledgement is received, two chirps 
sounds.
OR
If the Call Alert acknowledgement is not received, a low-
pitch tone sounds.

NAG-LACR-EMEA.book  Page 18  Wednesday, April 30, 2008  5:11 PM