Crestron c2enet-1 c2enet-2 User Manual

2-Series Ethernet Interface Expansion Cards 

Crestron C2ENET-1/-2 

The following table provides specifications for the C2ENET-1/-2.  

Power Requirements:

C2ENET-1 2 Watts (0.083 amps @ 24 VDC)
C2ENET-2 3 Watts (0.125 amps @ 24 VDC)

Network Type

10/100BaseT, half or full duplex 

Protocols

TCP/IP, UDP/IP, ICMP (Ping), & HTTP

SIMPL™ Windows®

Version 2.00 or later 

1

VT Pro-e

Version 2.3.3.1 or later 

1, 2

Version C2-1001.CUZ or later 

4

Internet Explorer

Version 4.0 or later

Netscape Navigator

Version 4.5 or later 

IP Address Configuration

Static and dynamic addressing

Dimensions

Height:  0.98 in (2.49 cm)
Width:   4.28 in (10.86 cm)
Depth:   4.71 in (11.95 cm)

Weight:

C2ENET-1 2.40 oz (0.07 kg)
C2ENET-2 2.60 oz (0.08 kg)

2-Series Control System Update File 

3

 

1. 

The latest software versions can be obtained from the Downloads | Software Updates section of the 
Crestron website (

 

2. 

Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product 
Catalog for a complete list of 2-Series control systems that are Ethernet-enabled directly or via a 
C2ENET-1/-2 Ethernet card. 

NOTE:  Crestron software and any files on the website are for Authorized Crestron 
dealers only. New users may be required to register to obtain access to certain areas 
of the site (including the FTP site).

 

The C2ENET-1 and C2ENET-2 (refer to graphics below and on next page) are 
printed circuit boards (PCBs) fastened to aluminum faceplates. The cards are 
designed to be installed in a Z-BUS expansion slot on the 2-Series control systems. 
Two thumbscrews secure the cards. 

The C2ENET-1 contains one 8-wire RJ-45 Ethernet/LAN port. The C2ENET-2 
contains two 8-wire RJ-45 ports (LAN A and LAN B). The port(s) is used for 
connection using an Ethernet cable (refer to cable connection example on page 4) to 
the Ethernet.  

 

•  2-Series Ethernet Interface Expansion Cards: C2ENET-1 & C2ENET-2