Clarion VXZ768R User Manual

OPERATIONS

VXZ768R

Auto store is a function for storing up to 6 
stations that are automatically tuned in 
sequentially. If 6 receivable stations cannot be 
received, a previously stored station remains 
unoverwritten at the memory position.

1. Press the [BND] button and select the 

desired band (FM or AM (MW/LW)).

2. Press and hold the [PS/AS] button for 2 

seconds or longer. The stations with good 
reception are stored automatically to the 
preset channels.

• If auto store is performed in the FM bands, the 

stations are stored in FM3 even if FM1 or FM2 
was chosen for storing stations.

Preset scan receives the stations stored in 
preset memory in order. This function is useful 
when searching for a desired station in memory.

1. Press the [PS/AS] button.

2. When a desired station is tuned in, press the 

[PS/AS] button again to continue receiving 
that station.

Note:
•

Be careful not to press and hold the [PS/AS] 
button for 2 seconds or longer, otherwise the auto 
store function is engaged and the unit starts 
storing stations.

This unit has a built-in RDS decoder system that 
supports broadcast stations transmitting RDS 
data.
This system can display the name of the 
broadcast station being received (PS) and can 
automatically switch to the broadcast station 
with the best reception as you move long 
distances (AF switching).
Also, if a traffic announcement or programme 
type is broadcast from an RDS station, no 
matter what mode you are in, this broadcast is 
received.
Additionally, if EON information is received, this 
information enables automatic switching of other 
preset stations on the same network and 
interruption of the station being received with 
traffic information from other stations (TP). This 
function is not available in some areas.
When using the RDS function, always set the 
radio to FM mode.
• AF

: Alternative Frequency

• PS 

: Programme Service Name

• PTY 

: Programme Type

• EON 

: Enhanced Other Network

• TP 

: Traffic Programme

• RDS interrupt does not function during AM radio 

reception.

• When set receives RDS signal, and can read PS 

data, PS appears in the display.

This allows switching of the indication during 
RDS reception.

1. Each time you press the [TITLE] button, the 

display changes in the following order:

VXZ768R.book  Page 20  Tuesday, December 27, 2005  10:08 PM