Crestron cnx-6pak User Manual

Crestron CNX-AUDIO-6PAK  

Six-Zone 

Audio 

Package

For example, a CD might automatically be assigned to port C of an IR card. To place 
this device on port D, simply click the Configure button, select the Port Assignment 
tab from the "Device Settings" window, and choose a new port assignment.  

The Controller area displays all control information about the device that controls 
the currently selected device. For example, if the selected device is an IR controlled 
CD, the controller may be an IR card such as the CNXIR-8. The top line of text 
displays a description of this controlling device. The list box shows all controllers to 
which the current device may be assigned. There are three buttons to modify the 
contents of the list box. 

•  Click the Configure button to modify the controller location in the 

control system.  

•  Click the New button to add a controller to the list assuming a valid 

controller is available.  

•  Click the Remove button to remove the currently selected controller 

from the list. Some controllers (i.e., built-in cards) cannot be removed. 

NOTE:  Expert users can always modify any of the device properties directly in 
SIMPL Windows, after the program is generated.  

Properties 

The Properties tab of the "Device # Properties" window, shown after this paragraph, 
lists a set of values for specified functions. Crestron recommends that the default 
values are used, but the programmer is free to alter them. Click the OK button to 
apply and save any changes made and close the window. The Cancel button closes 
the window without saving any changes that have been made.  

NOTE:  This tab is not available for all devices.  

 

•  11