Crestron cnx-6pak User Manual
Step 3: Add Rooms
The CNX-AUDIO-6PAK is designed
to permit control of up to eight
devices from up to six rooms. If the
intent is to control more than eight
devices or control seven or more
devices from a single room, the
designer should consider using the
Application Builder to supplement
the Audio Six-Pack Wizard or use
the Application Builder solely.
to permit control of up to eight
devices from up to six rooms. If the
intent is to control more than eight
devices or control seven or more
devices from a single room, the
designer should consider using the
Application Builder to supplement
the Audio Six-Pack Wizard or use
the Application Builder solely.
The top six buttons on the function keypad are pre-configured for source selection,
where by default the first button (on the top left of the panel) selects Device 1, the
second button (top right) selects Device 2, the third, Device 3 and so forth. In
applications with less than six devices, the extra source selection buttons will have
no function assignment. In those applications with seven or eight devices, the extra
devices will have no source selection buttons in certain rooms of the system. Use
this step to determine which of the available sources can be selected from a given
room.
where by default the first button (on the top left of the panel) selects Device 1, the
second button (top right) selects Device 2, the third, Device 3 and so forth. In
applications with less than six devices, the extra source selection buttons will have
no function assignment. In those applications with seven or eight devices, the extra
devices will have no source selection buttons in certain rooms of the system. Use
this step to determine which of the available sources can be selected from a given
room.
The CNX-AUDIO-6PAK is designed to provide control from up to six locations.
The Interfaces screen of the Wizard allows the user to assign source control from
each of the six rooms. From the pull-down above the user interface on the screen, as
shown after this paragraph, choose a room. The top six buttons of the keypad need to
be assigned to override the default settings. Move the cursor over one of the buttons
and notice that the perimeter of the button changes to a blue color. Selection of a
button changes the perimeter color to red and enables the Selected Source Button
area of the screen. Select an available source from the Source: field and assign a
label for the button on the keypad. Select another room and repeat the process.
The Interfaces screen of the Wizard allows the user to assign source control from
each of the six rooms. From the pull-down above the user interface on the screen, as
shown after this paragraph, choose a room. The top six buttons of the keypad need to
be assigned to override the default settings. Move the cursor over one of the buttons
and notice that the perimeter of the button changes to a blue color. Selection of a
button changes the perimeter color to red and enables the Selected Source Button
area of the screen. Select an available source from the Source: field and assign a
label for the button on the keypad. Select another room and repeat the process.
NOTE: The keypad has standard source selector switch caps installed and a kit of
custom switch caps is also supplied with the CNX-AUDIO-6PAK. Instructions for
installing the custom switch caps or re-arranging the standard switch caps is
provided in the latest revision of the CN-WP12F and CN-WP12N Operations Guide
(Doc. 5788).
custom switch caps is also supplied with the CNX-AUDIO-6PAK. Instructions for
installing the custom switch caps or re-arranging the standard switch caps is
provided in the latest revision of the CN-WP12F and CN-WP12N Operations Guide
(Doc. 5788).
NOTE: The lower six buttons on the keypad are fixed.
NOTE: The Net ID of each user interface is room specific and shown beneath the
user interface on the screen.
user interface on the screen.
Add Rooms
12
• Six-Zone Audio Package: CNX-AUDIO-6PAK
Operations & Installation Guide - DOC. 8169