Garmin da42-l360 User Manual

190-01062-01  Rev. A 

26

    Or:
a)  Turn the small FMS Knob to the left.  Initially, a flight plan waypoint list 

is displayed.

b)  Turn the small FMS Knob to the right to display the ‘RECENT’ 

waypoints.

c)  Turn the large FMS Knob to select the desired waypoint.
d)  Press the ENT Key.
e)  Press the ENT Key again to “accept” the waypoint.

1)  Press the FPL Key.
2)  Press the FMS Knob to activate the cursor (not required on the PFD). 
3)  Turn the large FMS Knob to highlight the waypoint after the desired airway 

entry point.  If this waypoint is not a valid airway entry point, a valid entry 
point should be entered at this time.

4)  Turn the small FMS Knob one click clockwise and press the LD AIRWY 

Softkey, or press the MENU Key and select “Load Airway”. The Select 
Airway Page is displayed.  The LD AIRWY Softkey or the “Load Airway” 
menu item is available only when an acceptable airway entry waypoint has 
been chosen (the waypoint ahead of the cursor position). 

5)  Turn the FMS Knob to select the desired airway from the list, and press the 

ENT Key.  Low altitude airways are shown first in the list, followed by “all” 
altitude airways, and then high altitude airways.

6)  Turn the FMS Knob to select the desired airway exit point from the list, and 

press the ENT Key. ‘LOAD?’ is highlighted.

7)  Press the ENT Key. The system returns to editing the flight plan with the 

new airway inserted.

1)  Press the FPL Key to display the active flight plan.
2)  Press the MENU 

Key

 to display the Page Menu.

3)  Turn the large FMS Knob to highlight ‘Invert Flight Plan’.