Garmin da42-l360 User Manual

190-01062-01  Rev. A 

32

4)  Turn the large FMS Knob to highlight the desired arrival.
5)  Press the ENT Key.  A list of transitions is displayed for the selected arrival.
6)  Turn either FMS 

Knob

 to select the desired transition.

7)  Press the ENT Key.  A list of runways may be displayed for the selected 

arrival.

8)  Turn the large FMS Knob to highlight the desired runway.
9)  Press the ENT Key.
10)  With ‘LOAD?’ highlighted, press the ENT Key.
11)  The arrival becomes part of the active flight plan.
12)  If an altitude associated with a waypoint in an arrival procedure is to be 

used to calculate vertical guidance perform the following steps:
a)  Press the FMS Knob to activate the cursor.
b)  Turn the large FMS Knob to highlight the desired waypoint altitude.
c)  Press the ENT Key to designate the altitude for use in giving vertical 

guidance.

1)  Press the FPL Key to display the active flight plan.
2)  Press the FMS Knob to activate the cursor.
3)  Turn the large FMS Knob to highlight the desired waypoint within the 

arrival.

4)  Press the ACT LEG Softkey.  A confirmation window showing the selected 

leg is displayed.

5)  With ‘ACTIVATE’ highlighted, press the ENT Key.

NOTE:    Check  the Aircraft  Flight  Manual  (AFM)  to  determine  if  SBAS 
functionality is approved.

NOTE:  If certain GPS parameters (SBAS, RAIM, etc.) are not available, some 
published approach procedures for the desired airport may not be displayed 
in the list of available approaches.