Garmin da42-l360 User Manual
Garmin G1000 Cockpit Reference Guide for the DA42-L360
190-01062-01 Rev. A
33
procedures
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight ‘SELECT APPROACH’.
3) Press the ENT Key. A list of available approaches for the destination airport
2) Turn the large FMS Knob to highlight ‘SELECT APPROACH’.
3) Press the ENT Key. A list of available approaches for the destination airport
is displayed.
4) Turn either FMS Knob to highlight the desired approach.
5) Press the ENT Key. A list of available transitions for the selected approach
5) Press the ENT Key. A list of available transitions for the selected approach
procedure is now displayed.
6) Turn either FMS Knob to select the desired transition. The “Vectors”
option assumes vectors will be received to the final course segment of
the approach and will provide navigation guidance relative to the final
approach course.
the approach and will provide navigation guidance relative to the final
approach course.
7) Press the ENT Key. ‘LOAD? or ACTIVATE?’ is now displayed with ‘LOAD?’
highlighted.
8) Turn the large FMS Knob to select either ‘LOAD?’ or ‘ACTIVATE?’.
Selecting ‘LOAD?’ enters the selected approach procedure into the active
Selecting ‘LOAD?’ enters the selected approach procedure into the active
flight plan, but is not currently active. Selecting ‘ACTIVATE?’ enters the
selected approach procedure into the active flight plan and is immediately
activated.
selected approach procedure into the active flight plan and is immediately
activated.
9) Press the ENT Key.
ACtivAte An ApprOACh in the ACtive Flight plAn
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight ‘ACTIVATE APPROACH’.
3) Press the ENT Key.
2) Turn the large FMS Knob to highlight ‘ACTIVATE APPROACH’.
3) Press the ENT Key.
ACtivAte A veCtOr tO FinAl ApprOACh Fix
1) Press the PROC Key.
2) Turn the large FMS Knob to highlight ‘ACTIVATE VECTOR-TO-FINAL’.
3) Press the ENT Key.
4) The final approach course becomes the active leg.
2) Turn the large FMS Knob to highlight ‘ACTIVATE VECTOR-TO-FINAL’.
3) Press the ENT Key.
4) The final approach course becomes the active leg.