Garmin da42-l360 User Manual
Garmin G1000 Cockpit Reference Guide for the DA42-L360
190-01062-01 Rev. A
71
Annunciations & Alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
gDl 69A messAge ADvisOries
Message
Comments
GDL69 CONFIG – GDL 69 config
error. Config service req’d.
error. Config service req’d.
GDL 69 configuration settings do not match
those of backup configuration memory. The
G1000 system should be serviced.
those of backup configuration memory. The
G1000 system should be serviced.
GDL69 FAIL – GDL 69 has failed.
A failure has been detected in the GDL 69.
The receiver is unavailable. The G1000 system
should be serviced
The receiver is unavailable. The G1000 system
should be serviced
MANIFEST – GDL software
mismatch, communication halted.
mismatch, communication halted.
The GDL 69 has incorrect software installed.
The G1000 system should be serviced.
The G1000 system should be serviced.
misCellAneOus messAge ADvisOries
Message
Comments
FPL WPT LOCK – Flight plan
waypoint is locked.
waypoint is locked.
Upon power-up, the G1000 system detects
that a stored flight plan waypoint is locked.
This occurs when an aviation database update
eliminates an obsolete waypoint. The flight
plan cannot find the specified waypoint and
flags this message. This can also occur with
user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it
no longer exists in any database,
Or
update the waypoint name/identifier to reflect
the new information.
that a stored flight plan waypoint is locked.
This occurs when an aviation database update
eliminates an obsolete waypoint. The flight
plan cannot find the specified waypoint and
flags this message. This can also occur with
user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it
no longer exists in any database,
Or
update the waypoint name/identifier to reflect
the new information.
FPL WPT MOVE – Flight plan
waypoint moved.
waypoint moved.
The system has detected that a waypoint
coordinate has changed due to a new aviation
database update. Verify that stored flight plans
contain correct waypoint locations.
coordinate has changed due to a new aviation
database update. Verify that stored flight plans
contain correct waypoint locations.
TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer has
expired.