Garmin da42-l360 User Manual

190-01062-01  Rev. A 

72

DB CHANGE – Database changed.  
Verify user modified procedures.

This occurs when a stored flight plan contains 
procedures that have been manually edited.   
This alert is issued only after an aviation 
database update.  Verify that the user-modified 
procedures in stored flight plans are correct 
and up to date.

DB CHANGE – Database changed.  
Verify stored airways.

This occurs when a stored flight plan contains 
an airway that is no longer consistent with 
the aviation database.  This alert is issued only 
after an aviation database update.  Verify use 
of airways in stored flight plans and reload 
airways as needed.

FPL TRUNC – Flight plan has been 
truncated.

This occurs when a newly installed aviation 
database eliminates an obsolete approach 
or arrival used by a stored flight plan.  The 
obsolete procedure is removed from the flight 
plan.  Update flight plan with current arrival or 
approach.

LOCKED FPL – Cannot navigate 
locked flight plan.

This occurs when the pilot attempts to activate 
a stored flight plan that contains locked 
waypoint.  Remove locked waypoint from flight 
plan.  Update flight plan with current waypoint.  

WPT ARRIVAL – Arriving at 
waypoint -[xxxx]

Arriving at waypoint [xxxx], where [xxxx] is the 
waypoint name.

STEEP TURN – Steep turn ahead.

A steep turn is 15 seconds ahead.  Prepare to 
turn.

INSIDE ARSPC – Inside airspace.

The aircraft is inside the airspace.

ARSPC AHEAD – Airspace ahead 
less than 10 minutes.

Special use airspace is ahead of aircraft.  The 
aircraft will penetrate the airspace within 10 
minutes.

ARSPC NEAR – Airspace near and 
ahead.

Special use airspace is near and ahead of the 
aircraft position.