cortech datalog 3 User Manual
Datalog 3 User Manual - Page 46 of 66
CORTECH DEVELOPMENTS LTD
By default the Alarm Database report setup will select all history events for the current day. To modify
the settings:
the settings:
1. In the ‘From Date’ field, type in the start date for the report or click the button on the right and select
the date from the calendar
2. In the ‘To Date’ field, type in the end date for the report or click the button on the right, and select the
date from the calendar.
3. In the ‘From Time’ field, click and type in or use the count up/down buttons to change the hours,
minutes and seconds to the start time for each day selected that the report should start from.
4. In the ‘To Time’ field, click and type in or use the count up/down buttons to change the hours,
minutes and seconds to the end time for each day selected that the report should end at.
5. In the Events field select the type of events to report, from the list:
Alarm Events
Select this if just alarm event information is required. Additionally, in the Alarm
Event check boxes, the operator can choose whether to include: Normal
Alarms, Tamper alarms, Fire Alarms, Pre-Alarms, Alarm Contact Open/Closed
times, Soak Test Alarms, and to include reset Cause information
Event check boxes, the operator can choose whether to include: Normal
Alarms, Tamper alarms, Fire Alarms, Pre-Alarms, Alarm Contact Open/Closed
times, Soak Test Alarms, and to include reset Cause information
Faults and Warnings
Displays any fault alarms and warning messages that have occurred for
the period elected.
Inhibit Events
Displays any inhibit operations for the period. The ‘User’ field allows viewing
inhibits by all users or a specific user. The default is for all zones but clicking on
the All zones check box will remove the tick and one or more zones can be
selected by typing in the field below the check box.
inhibits by all users or a specific user. The default is for all zones but clicking on
the All zones check box will remove the tick and one or more zones can be
selected by typing in the field below the check box.
Disables & Soaks Displays any Engineering disable or soak test operations that have occurred for
the period. The ‘User’ field allows viewing inhibits by all users or a specific user.
The default is for all zones but clicking on the All Zones check box will remove
the tick and one or more zones can be selected by typing in the field below the
check box.
The default is for all zones but clicking on the All Zones check box will remove
the tick and one or more zones can be selected by typing in the field below the
check box.
System Events
Displays information on any changes that take place on the system such as
password edits, Time Zone start and end messages, Program termination. The
‘User’ field allows viewing events caused by all users or a specific user.
password edits, Time Zone start and end messages, Program termination. The
‘User’ field allows viewing events caused by all users or a specific user.
All Events
Displays all events for the selected period.