Compustar p1wamr User Manual

  
IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any 
operations. All remotes must be coded at the same time.  

IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any 
operations. All remotes must be coded at the same time.  

 
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the 
Acc & On positions) five times within 7 seconds. The vehicle’s parking lights will flash once with the 
successful completion of this step. 
 
STEP 2: Within a 5 second period after cycling the ignition for the 5

th

 time, press button (I) on two-way 

remotes or the Lock button on one-way remotes for 0.5 seconds. The parking lights will flash once to 
confirm the transmitter has been coded. 

 
Exiting Programming: Programming is a timed sequence. The parking 
lights will flash twice signaling the end of programming mode. 
 
Programming Multiple Remotes: After the confirmation flash given in 
step 2, code additional remotes by pressing button (I) on two-way 
remotes or the Lock button on one-way remotes. The parking lights 
will flash once confirming each additional remote. All systems can 
recognize up to three remotes. 
 
 
 

 
 
 
 
 

 

 
 

 

  

 

12