hearth-and-home-technolog sl-350trs-ce-d User Manual
Heat & Glo • SL-350TRS-CE-D • 2033-900 Rev. N • 10/07
31
1. Place the fireplace
into position.
2. Level the fireplace
from side to side and
from front to back.
from front to back.
3. Shim the fireplace
with non-combus-
tible material, such
as sheet metal, as
necessary.
tible material, such
as sheet metal, as
necessary.
4. Secure the fireplace
to the framing by
nailing or screwing.
nailing or screwing.
Figure 38. Proper Positioning, Leveling, and
Securing of a Fireplace
Step 5
The Gas Control
System
The Gas Control
System
WARNING: THIS UNIT IS NOT FOR
USE WITH SOLID FUEL.
USE WITH SOLID FUEL.
Standing Pilot Ignition System
This system includes millivolt control valve,
standing pilot, thermopile/thermocouple flame
sensor, and piezo ignitor.
This system includes millivolt control valve,
standing pilot, thermopile/thermocouple flame
sensor, and piezo ignitor.
WARNING: 230 VAC MUST NEVER BE
CONNECTED TO A CONTROL VALVE
IN A MILLIVOLT SYSTEM.
CONNECTED TO A CONTROL VALVE
IN A MILLIVOLT SYSTEM.
The diagram below shows how to properly
position, level, and secure the fireplace.
position, level, and secure the fireplace.
Step 4
Positioning,
Leveling, and
Securing the
Fireplace
Positioning,
Leveling, and
Securing the
Fireplace
STANDING PILOT
Figure 39. Gas Control System
!
!
NAILING TABS
BOTH SIDES