Hitachi 13VR10B User Manual
PREPARATION FOR USE
16
PREPARATION FOR USE
CABLE CONNECTIONS
VHF/UHF COMBINED ANTENNA
The VHF/UHF Rod Antenna (not supplied) is detachable. Push the stem of
the antenna into the hole which is located on the upper back cabinet of the
unit.
Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to
the ANT. terminal of the TV/VCR as shown in the diagram below.
For the best reception, extend the VHF/UHF Rod Antenna fully and adjust its
position. (Avoid handling the top section when making adjustments.)
the antenna into the hole which is located on the upper back cabinet of the
unit.
Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to
the ANT. terminal of the TV/VCR as shown in the diagram below.
For the best reception, extend the VHF/UHF Rod Antenna fully and adjust its
position. (Avoid handling the top section when making adjustments.)
NOTE: Before pluggin the Rod antenna into antenna terminal, check that the pin
is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into
antenna terminal.
is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into
antenna terminal.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.