Hitachi 13VR10B User Manual

PREPARATION FOR USE 

 

17

Use this connection if your cable system connects direcly to your TV/VCR 
without a converter box. 
With this connection you, 1) can use your TV/VCR Remote Control to select 
channels, 2) program one or more unscrambled channels for Automatic Timer 
Recording. 

 

Note to CATV system installer: 
This reminder is provided to call the CATV system installer's attention to Article 
820-40 of the NEC that provides guidelines for proper grounding and, in 
particular, specifies that the cable ground shall be connected to the grounding 
system of the building as close to the poing of cable entry as practical. 

If your cable service supplies you with a converter box you can use the basic 
connection shown here. 
With this connection you can record and view any channel including 
scrambled channels. However, channel selection must be made with the 
converter box. This means that channels cannot be changed using the 
TV/VCR Remote Control. Unattended recording is limited to one channel at a 
time. 

TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL 
1. Set the TV/VCR channel selector to the output channel of the Cable 
Converter Box. (Ex. CH3) 
2. Select the channel to be recorded or viewed on the Cable Converter Box. 

 

NOTE: When using a cable converter box, you can not record one channel and 
view another.