Manualsbrain.com
  1. Manuals
  2. Brands
  3. Oricom
  4. mi40
  5. User Manual

Oricom mi40 User Manual

Download
Page of 36
45 of 72 
o 
Use the numeric keys and 
 to enter the number up to 18 
digits. 
o 
Press 
 to confirm the number and the feature is activated. 
o 
Calls from the number will be diverted to the answering 
machine. 
 
Block the Blocker 
 
When the blocker feature is on, all calls with Private CID will be 
answered immediately by the answering machine (if it is turned on). 
The blocker caller can use the SOS code to breakthrough and let the 
base ring for 8 seconds. 
 
• 
Press 
 to enter the menu mode. 
• 
Use 
 scroll through the menu until the display reads ANSWER 
MAC. 
• 
Press
. Use 
 to scroll until the display reads BLOCKER. 
• 
Press
. The current setting is displayed. 
• 
Use 
 to select ON or OFF. 
• 
Press 
 to confirm the selection and exit to BLOCKER. 
 
Note: If both the SCREEN screening and BLOCKER feature are on, 
calls from the screened numbers as well as those with Private 
CID will be diverted to the answering machine. 
 
 
Remote Access Code 
 
A 3-digit remote access code is used to access the answering 
machine remotely from any tone dialling telephone.  
 
• 
Press 
 to enter the menu mode  
• 
Use 
 scroll through the menu until the display reads ANSWER 
MAC. 
46 of 72 
• 
Press
. Use 
 to scroll until the display reads REMOTE PIN. 
• 
Press
. The display will show PIN? 
• 
Enter the correct remote access code of the connected base (The 
default remote access code is 123). 
• 
Press
. The display will show NEW PIN? 
• 
Enter the new pin code.  
• 
Press 
 to confirm. 
• 
The display will show REPEAT. 
• 
Re-enter the new pin code. 
• 
Press 
 to confirm and exit to REMOTE PIN. 
 
 
SOS Code 
 
A 3-digit SOS code is used to breakthrough when the call is screened 
or blocked. 
 
• 
Press 
 to enter the menu mode  
• 
Use 
 scroll through the menu until the display reads ANSWER 
MAC. 
• 
Press
. Use 
 to scroll until the display reads SOS CODE. 
• 
Press
. The display will show PIN? 
• 
Enter the correct SOS code of the connected base (The default 
SOS code is 111). 
• 
Press
. The display will show NEW PIN? 
• 
Enter the new pin code.  
• 
Press 
 to confirm. 
• 
The display will show REPEAT. 
• 
Re-enter the new pin code. 
• 
Press 
 to confirm and exit to SOS CODE. 
 
Note: The Remote Access code and SOS code cannot be the same 
because user can enter either code while OGM is played.