Oricom mi40 User Manual
47 of 72
Remote Access to the Answering Machine
The answering machine can be accessed from other tone dialling
telephones.
•
Place a call to your phone.
•
If the answering machine is on, the OGM plays
o
While the OGM is playing, press * and then the 3-digit remote
access code by using the keypad of the touch-tone phone
access code by using the keypad of the touch-tone phone
o
If the code is entered correctly, you will hear 2 beeps.
The new messages, if any, will be played back starting
with the oldest new one. Otherwise, the oldest message
will be played back.
with the oldest new one. Otherwise, the oldest message
will be played back.
You can also enter a short cut within 8 seconds. For
example, press 5 to stop the message playing. Press 9 to
record a new OGM etc.
example, press 5 to stop the message playing. Press 9 to
record a new OGM etc.
o
If the code is entered incorrectly, the OGM will be replayed.
Use the keypad of the touch-tone phone to re-enter * and
then the 3-digit remote access
Use the keypad of the touch-tone phone to re-enter * and
then the 3-digit remote access
•
If the answering machine is off,
o
After 10 rings, the answering machine is turned on.
o
You will hear 2 beeps and the OGM plays.
o
While the OGM is playing, press * then the 3-digit remote
access code by using the keypad of the touch-tone phone
access code by using the keypad of the touch-tone phone
o
If the code is entered correctly, you will hear 2 beeps.
The new messages, if any, will be played back starting
with the oldest new one. Otherwise, the oldest message
will be played back.
with the oldest new one. Otherwise, the oldest message
will be played back.
You can also enter a short cut within 8 seconds. For
example, press 5 to stop the message playing. Press 9 to
record a new OGM etc.
example, press 5 to stop the message playing. Press 9 to
record a new OGM etc.
o
If the code is entered incorrectly, the OGM will be replayed.
Use the keypad of the touch-tone phone to re-enter * and
then the 3-digit remote access
Use the keypad of the touch-tone phone to re-enter * and
then the 3-digit remote access
Note: The answering machine will drop the line after three failed
attempts.
If there is no incoming message and you do not enter anything
within 8 seconds after the remote access code was correctly
entered, the line will be dropped.
If there is no incoming message and you do not enter anything
within 8 seconds after the remote access code was correctly
entered, the line will be dropped.
48 of 72
Remote Access Shortcuts
Shortcuts for most remote access functions are the same as
those accessed from answering machine mode except Delete All
Messages
those accessed from answering machine mode except Delete All
Messages
•
Press * and then 0 within 2 seconds to delete all ICM’s.
Remote Access Responses
Most tones and alerts for remote access operations are the same
as those in the answering machine mode except
as those in the answering machine mode except
•
When 8 are pressed to turn the answering machine on, two
beeps confirmation tone will be heard.
beeps confirmation tone will be heard.
•
When 8 are pressed to turn the answering machine off, a
short beep tone will be heard.
short beep tone will be heard.
•
When # is pressed to change from ANS ONLY to ANS
RECORD mode, two beeps confirmation tone will be heard.
RECORD mode, two beeps confirmation tone will be heard.
•
When # is pressed to change from ANS RECORD to ANS
ONLY mode, a short beep tone will be heard.
ONLY mode, a short beep tone will be heard.
•
If the Memo is recorded when the memory is full, a long beep
reject tone will be heard.
reject tone will be heard.