Garmin 821P User Manual
Fine-tuning the Projector
65
Setting a Password
1. Press the
Freeze
button on the remote control for about 5 seconds
until you see the Password Protect menu:
2. Select
Password
and press
Enter
. You see the message
Change
the password?
3. Select
Yes
and press
Enter
.
4. Hold down the
Num
key on the remote control and use the
numeric keypad to enter a 4-digit password.
The password will be displayed as
****
. After you enter the last
digit, a confirmation screen appears. Enter the password again.
5. After you finish setting the password, press the
Esc
button to
return to the Password Protect menu.
Make a note of the password and keep it in a safe place in case you
forget it.
forget it.
Turning On the Password and User’s Logo
1. To enable the password, press the
Freeze
button on the remote
control for about 5 seconds until you see the Password Protect
menu
menu
2. Select
Power ON Protect
and press
Enter
.
3. Select
ON
and press
Enter
. Then press
Esc
.
note
If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 66.
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 66.
Use these buttons like a
numeric keypad to enter
the password
numeric keypad to enter
the password
Hold down this button to
activate the numeric
keypad
activate the numeric
keypad