Garmin 821P User Manual

4. If you want to disable the password temporarily, select 

Timer

 and 

press 

Enter

. Then hold down the 

Num

 button while you use the 

numeric keypad to enter the number of hours (from 0 to 9999) 
that you want the password feature disabled. If you want the 
projector to request the password every time it is turned on, set 
the timer to 

0H

. Press 

Enter

 when you’re done.

The countdown for the elapsed time begins as soon as you close 
the Password Protect menu. (You can check the elapsed time in 
this menu next to 

Time elapsed

.)

5. To enable your screen logo, select 

User’s Logo Protect

 and press 

Enter

. Select 

ON

 and press 

Enter

. 

When this feature is on the logo appears whenever the projector is 
turned on (if the 

Startup Screen 

is enabled in the Extended 

menu; see page 59) and as the A/V Mute screen (if you selected 
the 

Logo

 as the 

Background Color

 in the Extended menu). 

None of the User’s Logo features can be changed when the User’s 
Logo Protect function is enabled.

6. Press 

Menu

 to close the Password Protect menu.

If you lose the remote control, you will not be able to enter the 
password, so keep the remote control in a safe place at all times. 

When the period defined in the 

Time-elapsed

 setting has passed, and 

the password is entered correctly, the elapsed time will be reset to 

0

 

and the countdown will start again. Remember to disable or change 
this setting when you need to.

When the password function is enabled, you see this screen when you 
turn on the projector:

Esc