Runco plasmawall xp-65dhdxa User Manual
PlasmaWall XP-65DHD Owner’s Operating Manual
17
PRE
L
IMINAR
Y
• As it lies flat with the screen face
down. Place the protective sheet,
which was wrapped around the
plasma monitor when it was
packaged, between the screen and
your work surface to avoid
scratching or otherwise damaging
the screen surface.
which was wrapped around the
plasma monitor when it was
packaged, between the screen and
your work surface to avoid
scratching or otherwise damaging
the screen surface.
Ambient Light
In general, minimize or eliminate light sources directed at the display. Contrast ratio in your
images will be noticeably reduced if light directly strikes the display, such as when a shaft
of light from a window or floodlight falls on the image. Images may then appear washed
out and less vibrant.
images will be noticeably reduced if light directly strikes the display, such as when a shaft
of light from a window or floodlight falls on the image. Images may then appear washed
out and less vibrant.
Ventilation
If you are mounting the PlasmaWall in an enclosure, leave at least 2 inches (50 mm) of
space on all sides between it and surrounding objects, as shown in Figure 3-2. This allows
heat to disperse, maintaining the proper operating temperature.
space on all sides between it and surrounding objects, as shown in Figure 3-2. This allows
heat to disperse, maintaining the proper operating temperature.
Figure 3-2. Ventilation Requirements for Enclosure Mounting
50
mm
(2")
50
mm
(2")
50
mm
(2")
Wall
Wall
50
mm
(2")
50
mm
(2")