Nortel Networks P0857846 User Manual
Using System features / 127
P0857846 Issue 02
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Using special telephones
Direct-dial
You can reach the direct-dial telephone by dialing a single digit. The
direct-dial telephone is usually in a central location, such as a
attendant's desk. You can have up to five direct-dial telephones for
your Norstar system. It is usually the prime telephone or the central
answering position (CAP).
direct-dial telephone is usually in a central location, such as a
attendant's desk. You can have up to five direct-dial telephones for
your Norstar system. It is usually the prime telephone or the central
answering position (CAP).
The direct-dial telephone can send up to 30 messages and can
invoke Services to activate the extra-dial telephone.
invoke Services to activate the extra-dial telephone.
You cannot forward calls to a direct-dial telephone that is outside
your Norstar system. See “Making changes to Call Forward No
Answer” on page 22.
your Norstar system. See “Making changes to Call Forward No
Answer” on page 22.
Changing the direct-dial telephone assignments
Your installer or customer service representative sets up the direct-
dial telephone.
dial telephone.
You can change which direct-dial telephone a telephone is assigned
to, or assign it no direct-dial telephone.
to, or assign it no direct-dial telephone.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
guide. See Getting Started for more information.
1.
Press
ƒ••¤flfl‹››
.
2.
Press
¤‹fl›fl
(the default System Coordinator
password).
3.
Press
≠
at
Terminals&Sets
.
4.
Enter the internal number of the telephone you wish to program
and press
and press
≠
. The display reads
Capabilities
.
5.
Press
≠
.
6.
Press
‘
until the display reads
D-Dial
.
7.
Press
CHANGE
to select
Set1, Set2, Set3, Set4, Set5
or
None
.