Vulcan Materials gts12-3r User Manual

 
- 

8

 - 

 The griddle and its parts are hot.  Use care when operating, cleaning 

  Disconnect power supply and follow lockout / tagout procedures 

before cleaning and servicing the appliance. 
 

 

 

 

 

 

 

 

 

There are no parts on this unit that require lubrication.  
 
SERVICE AND PARTS INFORMATION 
Contact the Authorized Service Agency in your area to obtain service and parts 
information. For a complete listing of Service and Parts depots  refer to 
www.vulcanequipment.com. 
 
When calling for service the following information should be available from the appliance 
serial plate: Model Number, Serial Number and voltage.  
 

1. #2 Philips head screw driver 
2. M10 socket driver 
3. 7/16” socket driver 
4. Rubber mallet 
5. Power drill 
6. 7/8” deep well socket wrench 
7. (2) large “F” clamps 
8. 5/32” drill bits for metal  
9. Thread lock compound (Loctite Blue) 
10. ¾” wide masking tape 

      
Contact the authorized service agency in your area for field installation. 
 
The field installation instructions are prepared for the use of trained service technicians and should only be 
used by those who are properly qualified.  These instructions are not intended to be all encompassing.  You 
should read, in its entirety, the installation instructions to determine if you have the necessary tools, 
instruments and skills required to perform the procedure. The field installation should not be attempted if you 
do not have the necessary tools, instruments and skills.