Vulcan Materials gts12-3r User Manual

 
- 

9

 - 

    

   

Griddle Top  
Assembly Mounting Points 

 

 
Prior to assembly, make sure the 
mounting bracket is the correct size. The 
back bracket should match the width of 
the griddle.  Make sure the griddle top 
electrical specifications match the 
available service.  Each griddle top will 
require its own separate electrical service. 
 
1. Using (2) washers and (2) ¼”-28  bolts, 

assemble one of the side mount 
brackets to the back bracket as shown 
in Fig. 1. The bolts should be hand 
tightened only at this point. Repeat 
procedure to attach the other side 
mount bracket to the other end of the 
back bracket. 

 
2. The entire mounting bracket system   

should be assembled at this point as 
shown in Fig. 2 with bolts hand 
tightened only. 

 
 

 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
3.  Slide mounting bracket system onto 
     back of the griddle as shown in Fig. 3. 

The left and right side brackets should 
be pushed up until stopped by the 
bottom of the griddle and pushed 
forward until stopped by the griddle 
back panel.  Secure the mounting 
bracket system at this location with a 
“F” clamp on each side of the assembly 
as shown. Place a wood block or other 
type of protection between clamp and 
griddle plate.