Haier hlp28e User Manual

5

   Pliers

   Wrench

   Flat-blade  Screwdriver

   Measuring  Tape

   Carpenter’s  Level

   Drain Hose Clamp

   Drain Hose Hook

   Drain  Hose

   Water Hoses (2)  

(flat washers pre-installed)

   User  Manual

   The washer must be installed on a solid floor to minimize vibration during the 

spin cycle. A concrete floor is best.

   The floor should be level with maximum slope of 1" (25 mm) under entire washer.

   A suitable location is protected from direct sunlight and heat sources such as 

radiators, baseboard heaters, or cooking appliances.

   Do not install on carpeting.

   The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of 

power cord on the back of the washer.

   Hot and cold water faucets must be present within 3 ft. (0.9 m) of the hot and 

cold connections on the washer.

   A water heater must supply hot water with a temperature of at least 120°F 

(49°C).

   The water pressure should be between 20 and 100 psi (138 and 690 kPa).

 

 

Do not install or operate the washer where it will be exposed to 

temperatures below 32°F (0°C). Water remaining in the washer will 

freeze and cause damage to the washer.