Fujitsu V3.1.0 User Manual
3.
To use this feature, the following settings must first be defined:
Subnet name
Set the subnet name for registration.
The name must start with an alphabetic character and can be up to 16 alphanumeric characters long (including underscores, "_",
hyphens, "-", and periods, ".").
The name must start with an alphabetic character and can be up to 16 alphanumeric characters long (including underscores, "_",
hyphens, "-", and periods, ".").
Network address
Configure the network address of the subnet used as the admin LAN.
Enter valid values for the network address.
Enter valid values for the network address.
Subnet mask
Enter valid values for the subnet mask.
Gateway
Enter the settings for the gateway used for communication with the admin server on the admin LAN.
4.
Click <OK>.
Information
When registering an admin LAN subnet for the first time, change the simplified DHCP service for Resource Orchestrator to the OS standard
DHCP Service.
Resource Orchestrator takes exclusive possession of the OS standard DHCP Service.
DHCP Service.
Resource Orchestrator takes exclusive possession of the OS standard DHCP Service.
Note
-
It is necessary to perform network settings for each admin LAN subnet so that managed servers belonging to subnets other than the
admin LAN can communicate with the admin server.
admin LAN can communicate with the admin server.
For details on how to configure the network settings, refer to "7.6 Configuring the Network Environment" in the "Design Guide VE".
-
In a clustered manager configuration, when registering an admin LAN subnet for the first time, perform "
".
Settings for Clustered Manager Configurations
The following configuration is necessary only when registering an admin LAN subnet for the first time.
[Windows Manager]
Information
When configuring a cluster system in an environment that already has an admin LAN registered, perform steps 5 to 10, and 13.
1.
Allocate the shared disk to the primary node.
Right-click [Services and Applications]-[RC-manager] on the Failover Cluster Management tree, and select [Move this service or
application to another node]-[1 - Move to node
application to another node]-[1 - Move to node
node_name
] from the displayed menu.
The name of the primary node is displayed for
node_name
.
2.
Delete the registry replication settings from the following "Services and Applications" of the manager.
Based on the following table, delete registry replication for the resources.
-
x64
- 49 -