Konica Minolta pi2001e um 110 User Manual
Control Panel Operations (PC Print Mode)
6
Pi2001e
6-5
Canceling a Print Job
You can cancel a print job from the control panel of the copier. You can
cancel a print job from the control panel only while the copier is in PC print
mode.
cancel a print job from the control panel only while the copier is in PC print
mode.
1
Make sure the copier’s display
shows “*PC PRINT* PRINTING”.
shows “*PC PRINT* PRINTING”.
2
Press the [Stop] key.
The “PC JOB CANCEL?”
confirmation message appers.
confirmation message appers.
3
Press the [Yes] key to cancel the
print job.
print job.
H
Press the [No/C] key to resume
printing.
printing.
H
If no key is pressed within 5
seconds, printing will resume.
seconds, printing will resume.
Note
You can use steps 2 and 3 of the above procedure to cancel a print
job while any of the following messages is indicated on the display:
PAPER EMPTY, INCORRECT PAPER SIZE, NO SUITABLE
PAPER, PAPER SIZE ERROR, LOAD PAPER, PAPER JAM,
FRONT COVER OPEN , FUSER COVER OPEN, TONER
EMPTY, MEDIA TYPE ERROR, REMOVE PAPER IN BYPASS
TRAY.
job while any of the following messages is indicated on the display:
PAPER EMPTY, INCORRECT PAPER SIZE, NO SUITABLE
PAPER, PAPER SIZE ERROR, LOAD PAPER, PAPER JAM,
FRONT COVER OPEN , FUSER COVER OPEN, TONER
EMPTY, MEDIA TYPE ERROR, REMOVE PAPER IN BYPASS
TRAY.
A print job cannot be canceled while print data is being received by
the copier.
the copier.
4
“JOB CANCELED” appears on the
display and the print job is canceled.
display and the print job is canceled.