Cissell chmw35-we55-165 User Manual
23
4
Display information
The left display will indicate the temperature of the wash bath - in °C or °F (on
machines where this function has been selected).
machines where this function has been selected).
The central display shows the remaining time to the end of the wash cycle.
For programs which are being run for the first time, the machine will take a
theoretical time estimate. If this time indication does not correspond to the real
cycle time, the cycle time will be corrected from the second cycle onwards (Self-
Teaching function of the machine).
This function has to be specified during preprogramming.
theoretical time estimate. If this time indication does not correspond to the real
cycle time, the cycle time will be corrected from the second cycle onwards (Self-
Teaching function of the machine).
This function has to be specified during preprogramming.
The right display will continue to show the selected program number.
If a "Level-stop" was programmed (which halts the programmer during the filling
of the cylinder) and/or a "Heat-stop" (which stops the programmer during the
heating up of the wash bath, then the respective LED’s light up in the display.
Once the required water level and/or temperature have been reached, the LED
is turned off and the internal programmer advances again.
of the cylinder) and/or a "Heat-stop" (which stops the programmer during the
heating up of the wash bath, then the respective LED’s light up in the display.
Once the required water level and/or temperature have been reached, the LED
is turned off and the internal programmer advances again.
Wash cycle-LED’s
Each program segment has a corresponding LED. Each of these 6 LED’s light up
when the appropriate segment is executed. This way, the program sequence can be
accurately followed.
When a LED blinks, the machine is taking up water.
When a LED blinks slowly, the machine is heating up the water.
when the appropriate segment is executed. This way, the program sequence can be
accurately followed.
When a LED blinks, the machine is taking up water.
When a LED blinks slowly, the machine is heating up the water.
Spin-LED’s
When the water is drained at the at the end of a program segment and the machine
spins if so desired, the left spin-LED (intermediate spin) will light up together with
the cycle-LED.
spins if so desired, the left spin-LED (intermediate spin) will light up together with
the cycle-LED.
- Functioning of the spin-LED’s during intermediate spin:
LED
drain/distribution
low spin
coast
Interm. spin
blinking rapidly continuously continuously
- Functioning of the spin-LED’s during gentle-intermediate spin:
LED
drain/distribution
low spin
coast
Interm. spin
blinking rapidly blinking slowly blinking slowly
During final spin, both the left spin-LED (intermediate spin) will light up together with
the right spin-LED.
the right spin-LED.
- Functioning of the spin-LED’s during final spin:
LED
drain/distribution
low spin
high spin
coast
tumble
Interm. spin
blinking rapidly continuously
slowly
continuously
off
Final spin
continuously
continuously
slowly
continuously rapidly
- Functioning of the spin-LED’s during gentle-final spin:
LED
drain/distribution
low spin
high spin
coast
tumble
Interm. spin
blinking rapidly
slowly
----
slowly
off
Final spin
continuously
continuously
----
continuously rapidly
Indications of program
sequence