Fagor nc-200 pb Installation Instruction
NC-200 PB - Installation Manual - Page: 5
SAFETY CONDITIONS
Read the following safety measures in order to prevent damage to personnel,
to this product and to those products connected to it.
to this product and to those products connected to it.
Fagor Automation shall not be held responsible for any physical or material
damage derived from the violation of these basic safety regulations.
damage derived from the violation of these basic safety regulations.
Do not open this unit
Only personnel authorized by Fagor Automation may open this
unit.
unit.
Do not handle the connectors with the unit connected to AC
power.
Before handling the connectors (mains, feedback, etc.) make sure
that the unit is not connected to AC power.
Before handling the connectors (mains, feedback, etc.) make sure
that the unit is not connected to AC power.
Use proper Mains AC power cables
To avoid risks, use only the Mains AC cables recommended for this unit.
Avoid electrical overloads
In order to avoid electrical discharges and fire hazards, do not apply electrical
voltage outside the range indicated in chapter 2 of this manual
voltage outside the range indicated in chapter 2 of this manual
Ground connection
In order to avoid electrical discharges, connect the ground terminals of all the
modules to the main ground terminal. Before connecting the inputs and outputs
of this unit, make sure that all the grounding connections are properly made.
modules to the main ground terminal. Before connecting the inputs and outputs
of this unit, make sure that all the grounding connections are properly made.
Before powering the unit up, make sure that it is connected to ground
In order to avoid electrical discharges, make sure that all the grounding
connections are properly made.
connections are properly made.
Ambient conditions
Respect the temperature and humidity ranges specified on the chapter about
technical characteristics in this manual (1.3).
technical characteristics in this manual (1.3).
Do not work in explosive environments
In order to avoid risks, damage, do not work in explosive environments.