Fagor nc-200 pb Installation Instruction
Page: 6 - Installation Manual - NC-200 PB
Working environment
This unit is ready to be used in Industrial Environments complying with the
directives and regulations effective in the European Community
directives and regulations effective in the European Community
Install the unit in the right place
It is recommended, whenever possible, to instal the DRO so its power switch
of the back panel is at a distance between 0.7 m (27.5 inches) and 1.7 m (5.6
ft) off the floor and away from direct sunlight, hot air, coolants, chemical
products, blows as well as from relays, or high electromagnetic fields (about
0.5m or 20 inches) that could damage it.
of the back panel is at a distance between 0.7 m (27.5 inches) and 1.7 m (5.6
ft) off the floor and away from direct sunlight, hot air, coolants, chemical
products, blows as well as from relays, or high electromagnetic fields (about
0.5m or 20 inches) that could damage it.
This unit complies with the European directives on electromagnetic compatibility.
Nevertheless, it is recommended to keep it away from sources of electromagnetic
disturbance such as.
- Powerful loads connected to the same AC power line as this equipment.
- Nearby portable transmitters (Radio-telephones, Ham radio transmitters).
- Nearby radio / TC transmitters.
- Nearby arc welding machines.
- Nearby High Voltage power lines.
- Disturbance generating elements of the machine.
- Etc.
Nevertheless, it is recommended to keep it away from sources of electromagnetic
disturbance such as.
- Powerful loads connected to the same AC power line as this equipment.
- Nearby portable transmitters (Radio-telephones, Ham radio transmitters).
- Nearby radio / TC transmitters.
- Nearby arc welding machines.
- Nearby High Voltage power lines.
- Disturbance generating elements of the machine.
- Etc.
Safety symbols
Symbols which may appear on the manual
WARNING. symbol
It has an associated text indicating those actions or operations may hurt
people or damage products.
It has an associated text indicating those actions or operations may hurt
people or damage products.
Symbols that may be carried on the product
WARNING. symbol
It has an associated text indicating those actions or operations may hurt
people or damage products.
It has an associated text indicating those actions or operations may hurt
people or damage products.
"ELECTRICAL SHOCK" symbol
It indicates that point may be under electrical voltage
It indicates that point may be under electrical voltage
"GROUND PROTECTION" symbol
It indicates that point must be connected to the main ground point of
the machine as protection for people and units.
It indicates that point must be connected to the main ground point of
the machine as protection for people and units.