NEC 42VP4 User Manual

19

Use these settings if the picture has noise due to poor
reception or when playing video tapes on which the picture
quality is poor.

Example: Setting “NR-3”

1. Use the ▲ and ▼ buttons to select “PICTURE”, then

press the MENU/ENTER button.
The “PICTURE” screen appears.

2. Use the ▲ and ▼ buttons to select “NR”.

3. Use the 

  and  

 buttons to select “NR-3”.

The mode switches as follows when the 

 and 

buttons are pressed:

→

↔

↔

↔

←

* If neither the 

 or 

 button is pressed within 5 seconds,

the current selection is set and the previous screen
reappears.

4. Once the setting is completed ...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

* “NR” stands for Noise Reduction.
* This function reduces noise in the picture.

There are three types of noise reduction. Each has a
different level of noise reduction.
The effect becomes stronger as the number increases
(in the order 

NR-1 

→

 NR-2 

→

 NR-3

).

OFF ...............

Turns the noise reduction function off.

Use this procedure to set color tone produced by the plasma
display.

Example: Setting “HIGH”

1. Use the ▲ and ▼ buttons to select “PICTURE”, then

press the MENU/ENTER button.
The “PICTURE” screen appears.

2. Use the ▲ and ▼ buttons to select “COLOR TEMP.”.

3. Use the 

 and 

 buttons to select “HIGH”.

The mode switches as follows when the 

 and 

buttons are pressed:

→

 LOW 

↔

 MID LOW 

↔

↔

←

* See below to set “WHITE BALANCE”.

* If neither the 

 or 

 button is pressed within 5 seconds,

the current selection is set and the previous screen reappears.

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

LOW ................

Redder

MID LOW

......... Slightly redder

MID

................... Standard (slightly bluer)

HIGH ...............

Bluer

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory defaults.

Use this procedure to adjust the white balance for each
color temperature to achieve the desired color quality.

Example: Adjusting the “GAIN RED” of “HIGH” color
temperature

4. Press the MENU/ENTER button.

The “WHITE BALANCE” screen appears.