NEC 42VP4 User Manual

20

5. Use the ▲ and ▼ buttons to select “GAIN RED”.

6. Adjust the white balance using the 

 and 

 buttons.

*  If neither the 

 or 

 button is pressed within 5 seconds,

the current setting is set and the previous screen reappears.

7. Once the adjustment is completed...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.

Information
 

GAIN R/G/B

..... White balance adjustment for signal

level

BIAS R/G/B .....

White balance adjustment for black
level

RESET ............

Resets settings to the factory default
values. Use 

 

 and 

 buttons to select

“ON”, then press the MENU/ENTER
button.

 

Select “RESET” under the WHITE BALANCE menu.

This feature adjusts the brightness of the midtone areas
while keeping shadows and highlights unchanged.

Example: Setting “3”

1. Use the ▲ and ▼ buttons to select “PICTURE”, then

press the MENU/ENTER button.
The “PICTURE” screen appears.

2. Use the ▲ and ▼ buttons to select “GAMMA”.

3. Use the 

 and 

 buttons to select “3”.

The mode switches as follows each time the 

 or 

button is pressed:

→

 1 

↔

 2 

↔

↔

←

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

The picture becomes darker as the number increases
(in the sequence of 1, 2, 3, 4).

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory defaults.

This feature allows more detailed tone to be reproduced
especially in the dark area.

Example: Setting “2”

1. Use the ▲ and ▼ buttons to select “PICTURE”, then

press the MENU/ENTER button.
The “PICTURE” screen appears.

2. Use the ▲ and ▼ buttons to select “LOW TONE”.

3. Use the 

 and 

 buttons to select “2”.

The mode switches as follows each time the 

 or 

button is pressed:

→

 AUTO 

↔

 1 

↔

↔

←

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.

AUTO .......

Will automatically appraise the picture and
make adjustments.

1 ...............

Will apply the dither method suitable for
still pictures.

2 ...............

Will apply the dither method suitable for
motion pictures.

3 ...............

Will apply the error diffusion method.

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory defaults.