ZyXEL Communications ZyWALL 100 User Manual
ZyWALL 100
9
Step 1. Click Wizard Setup in the main menu to display the first wizard screen.
System Name is for identification purposes.
Enter your computer's "Computer Name".
The Domain Name entry is what is propagated to
the DHCP clients on the LAN. If you leave this
blank, the domain name obtained by DHCP from
the ISP is used. Click Next to continue.
Enter your computer's "Computer Name".
The Domain Name entry is what is propagated to
the DHCP clients on the LAN. If you leave this
blank, the domain name obtained by DHCP from
the ISP is used. Click Next to continue.
Step 2. The second wizard screen has three variations depending on what encapsulation type you use. Use
the information in Internet Account Information to fill in fields.
Choose Ethernet when the WAN port
is used as a regular Ethernet. Choose
from Standard or a RoadRunner
version. You’ll need User Name,
Password and Login Server IP
Address for some Roadrunner
versions.
Point-to-Point Protocol over Ethernet
(PPPoE) also functions as a dial-up
connection. Therefore you’ll also need
a username and password and
possibly the PPPoE service name.
Your ISP will give you all needed
information.
Choose PPTP if your service provider
uses a DSL terminator with PPTP
login. The ZyWALL must have a static
IP address in this case. You’ll also
need a login name, associated
password, the DSL terminator IP
address and possibly a connection ID.
Click Next to continue.
is used as a regular Ethernet. Choose
from Standard or a RoadRunner
version. You’ll need User Name,
Password and Login Server IP
Address for some Roadrunner
versions.
Point-to-Point Protocol over Ethernet
(PPPoE) also functions as a dial-up
connection. Therefore you’ll also need
a username and password and
possibly the PPPoE service name.
Your ISP will give you all needed
information.
Choose PPTP if your service provider
uses a DSL terminator with PPTP
login. The ZyWALL must have a static
IP address in this case. You’ll also
need a login name, associated
password, the DSL terminator IP
address and possibly a connection ID.
Click Next to continue.
Step 3. Fill in the fields and click Finish to save and complete the wizard setup.