ZyXEL Communications P-870HW-I User Manual

P-870HW-I1 User’s Guide

Chapter 6 Wireless LAN

107

Use this screen to enable and configure WPA2 encryption in your wireless network. To open 
this screen, click Network > Wireless LAN, and set Security Mode to WPA2.

Figure 54   Network > Wireless LAN > General > WPA2

Idle Timeout

The ZyXEL Device automatically disconnects a wireless station from the wired 

network after a period of inactivity. The wireless station needs to enter the username 

and password again before access to the wired network is allowed. Enter a time 

interval between 10 and 9999 seconds.

Group Key 

Update Timer

The Group Key Update Timer is the rate at which the ZyXEL Device sends a new 

group key to all clients. This process changes the WEP key on a regular basis. Enter 

a time interval between 10 and 9999 seconds.

Table 42   Network > Wireless LAN > General > WPA2-PSK (continued)