ZyXEL Communications P-870HW-I 用户手册
P-870HW-I1 User’s Guide
Chapter 6 Wireless LAN
107
6.4.9 General Wireless LAN Screen: WPA2
Use this screen to enable and configure WPA2 encryption in your wireless network. To open
this screen, click Network > Wireless LAN, and set Security Mode to WPA2.
this screen, click Network > Wireless LAN, and set Security Mode to WPA2.
Figure 54 Network > Wireless LAN > General > WPA2
Idle Timeout
The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the username
and password again before access to the wired network is allowed. Enter a time
interval between 10 and 9999 seconds.
Group Key
Update Timer
The Group Key Update Timer is the rate at which the ZyXEL Device sends a new
group key to all clients. This process changes the WEP key on a regular basis. Enter
a time interval between 10 and 9999 seconds.
Table 42 Network > Wireless LAN > General > WPA2-PSK (continued)
LABEL
DESCRIPTION