ZyXEL Communications P-870HW-I User Manual

P-870HW-I1 User’s Guide

248

Chapter 21 Introducing the SMT

Note: There is an inactivity timeout, and the default value is five minutes. If there is no 

activity for longer than five minutes, your ZyXEL Device will automatically log 
you out. You will then have to telnet into the ZyXEL Device again. You can use 
the web configurator or the CI commands (menu 24.8) to change the inactivity 
timeout period.

The following table provides an overview of each menu item.

               Copyright (c) 1994 - 2003 ZyXEL Communications Corp.

                              P-870HW-I1 Main Menu

     Getting Started                      Advanced Management
       1. General Setup                     21. Filter and Firewall Setup
       2. WAN Setup                         22. SNMP Configuration
       3. LAN Setup                         23. System Security
       4. Internet Access Setup             24. System Maintenance
                                            25. IP Routing Policy Setup
                                            26. Schedule Setup

     Advanced Applications
       11. Remote Node Setup
       12. Static Routing Setup
       14. Dial-in User Setup
       15. NAT Setup                        99. Exit

                          Enter Menu Selection Number:

Table 111   SMT Menus Overview 

1 General Setup

Use this menu to set up the system name, 

domain name, and DNS servers.

1.1 Configure 

Dynamic DNS

Use this menu to configure your dynamic DNS 

account settings.

1.1.1 DDNS Edit Host

Use this menu to configure your dynamic DNS 

domain name settings.

2 WAN Setup

Use this menu to configure the WAN MAC 

address.

3 LAN Setup

3.1 LAN Port Filter 

Setup

Use this menu to specify input and output filter 

sets for the LAN port.