Kenwood TK-3302U User Manual

0

VOX operation allows you to transmit hands-free.  This feature 

must first be activated by your dealer, and can only be used if 

you are using a supported headset.
To activate VOX and set the VOX Gain level, perform the 

following steps:
1  Connect the headset to the transceiver .

•  The VOX function does not activate when a headset is not 

connected to the accessory terminal of the transceiver.

2  With the transceiver power OFF, press and hold the Side 1 

key while turning the transceiver power ON.

3  Continue to hold the Side 1 key until a beep sounds.

•  The LED indicator lights orange.
•  When the 

Side 1 key is released, the transceiver announces the 

VOX Gain level.

4  Press the Side 1 key to increase the VOX Gain level and 

the 

Side 2 key to decrease the level.

•  The VOX Gain can be adjusted from levels  to 0 and OFF.
•  The transceiver announces the VOX Gain level as you adjust it.  

If OFF is selected, a beep sounds.

5  Press the PTT switch to save the setting.

•  A beep will sound.
•  The transceiver announces the new VOX Gain level.

6  Turn the transceiver power OFF and the ON again to 

activate VOX.

Note:  If a headset is connected to the transceiver while the VOX 

function is switched ON and the VOX Gain level is configured to a 

higher, more sensitive level, louder received signals may cause the 

transceiver to start transmission.