ZyXEL Communications zywall 50 User Manual
ZyWALL 50 Internet Security Gateway
Internet Access
6-1
Chapter 6
Internet Access
This chapter shows you how to configure your ZyWALL for Internet access.
6.1 Internet
Access
Setup
You will see three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE
Encapsulation.
Encapsulation.
6.1.1 Ethernet Encapsulation
You must choose the Ethernet option when the WAN port is used as a regular Ethernet. The PPPoE choice
is for a dial-up connection using PPPoE. If you choose Ethernet in menu 4 you will see the next screen.
is for a dial-up connection using PPPoE. If you choose Ethernet in menu 4 you will see the next screen.
Figure 6-1 Menu 4 — Internet Access Setup (Ethernet)
The following table describes this screen.
Table 6-1 Internet Access Setup Menu Fields
FIELD DESCRIPTION
ISP’s Name
Enter the name of your Internet Service Provider, e.g., myISP. This
information is for identification purposes only.
information is for identification purposes only.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: