ZyXEL Communications zywall 50 User Manual
ZyWALL 50 Internet Security Gateway
Internet Access
6-3
The ZyWALL 50 supports one PPTP server connection at any given time.
6.1.3 Configuring the PPTP Client
To configure a PPTP client, you must configure the My Login and Password fields for a PPP connection and
the PPTP parameters for a PPTP connection.
After configuring My Login and Password for PPP connection, press [SPACE BAR] in the Encapsulation
field in Menu 4 -Internet Access Setup to choose PPTP as your encapsulation option. This brings up the
following screen.
the PPTP parameters for a PPTP connection.
After configuring My Login and Password for PPP connection, press [SPACE BAR] in the Encapsulation
field in Menu 4 -Internet Access Setup to choose PPTP as your encapsulation option. This brings up the
following screen.
Figure 6-2 Internet Access Setup (PPTP)
The following table contains instructions about the new fields when you choose PPTP in the Encapsulation
field in menu 4.
field in menu 4.
Table 6-2 New Fields in Menu 4 (PPTP) screen
FIELD DESCRIPTION
EXAMPLE
Encapsulation
Press [SPACE BAR] and then press [ENTER] to choose
PPTP. The encapsulation method influences your choices for
IP Address.
PPTP. The encapsulation method influences your choices for
IP Address.
PPTP
Idle Timeout
This value specifies the time in seconds that elapses before
the ZyWALL automatically disconnects from the PPTP
server.
the ZyWALL automatically disconnects from the PPTP
server.
100
(default)
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPTP
Encapsulation= PPTP
Service Type= N/A
My Login=
My Login=
My Password= ******
Idle Timeout= 100
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address=N/A
IP Subnet Mask= N/A
Gateway IP Address=N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: