Kenwood TK-8180 User Manual

8

Your dealer can program your transceiver with Trunking and Conventional zones.
The transceiver can handle up to 128 zones with up to 250 channels/ group IDs
in each zone and a total combined maximum of 512 channels/ group IDs.
Zones, channels/ group IDs, and their functions are programmed by your dealer.

Press the   switch to switch the transceiver ON.

• A beep sounds and the display momentarily lights up.

• If the Transceiver Password function is programmed, “

” appears on the

display.  You must enter the password to unlock the transceiver.  Refer to “Transceiver
Password”, below.

Press the   switch again to switch the transceiver OFF.

■

To enter the password:

1 Press the   and   keys to select a digit.

2 Press the C> key to accept the entered digit and move to the next digit.

• Press the A key to delete an incorrect character.  Press and hold the A key to

delete all entered characters.

• Repeat steps 1 and 2 to enter the entire password.

3 Press the S key to confirm the password.

• If you enter an incorrect password, an error tone sounds and the transceiver

remains locked.

To enter the password using an optional DTMF keypad:

1 Press the DTMF keys corresponding to the password digits.

• Press the A or DTMF # key to delete an incorrect character.  Press and hold the

A or DTMF # key to delete all entered characters.

2 Press the S or DTMF

key to confirm the password.

• If you enter an incorrect password, an error tone sounds and the transceiver

remains locked.

Press the key programmed as Volume Up to increase the volume and Volume
Down to decrease the volume.

• The default setting for the 

 key is Volume Up.

• The default setting for the 

 key is Volume Down.