Kenwood TK-8180 User Manual

10

1 Select the desired zone and group ID using the Zone and CH/GID keys.

2 Press and hold the PTT switch.

3 If the PTT Proceed tone sounds, communication is possible; start speaking

into the microphone.  Release the PTT switch to receive.

• For best sound quality at the receiving station, hold the microphone approximately

1.5 inches (3 ~ 4 cm) from your mouth.

• Your dealer can deactivate the PTT Proceed tone, if necessary.  Ask your dealer

for details.

1 When a dispatch call is received, the transceiver will automatically change to

the correct group ID and you will hear the call.

2 Readjust the volume as necessary, using the Volume keys.

1 Select the desired zone and group ID using the Zone and CH/GID keys.

• Alternatively, you can press the key programmed as Auto Telephone to

automatically search for a Telephone Repeater.

2 Press and hold the PTT switch for approximately 1 second to ensure a

connection.

• Confirm that there is a dial tone after you release the PTT switch.

3 Place the call, following the instructions for making a DTMF call, starting on

page 18.

4 When the called party responds, press the PTT switch and speak into the

microphone.  Release the PTT switch to receive.

• Only one person can speak at a time.

5 To end the call, press and hold the PTT switch, then press the DTMF # key or

the key programmed as Telephone Disconnect.

1 When a telephone call is received, the transceiver will automatically change

to the correct group ID and you will hear the call.

• A ringer tone will sound when a call is received.

2 Press and hold the PTT switch to speak, and release it to receive.

• Only one person can speak at a time.

3 To end the call, press and hold the PTT switch, then press the DTMF # key or

the key programmed as Telephone Disconnect.