Konica Minolta kn303ev2 User Manual
Chapter 6 NetWare Configuration
6-2 Konica Network Interface Card INSTRUCTION MANUAL
To print with the printing system equipped with the network interface card by using Novell NetWare, the
setup procedures depend on the NetWare version and the method of resource management.
■
Setup with NWSetup
To use NWSetup program you must have IPX NetWare connection and the Novell 32-bit client installed.
You must be logged in to the NetWare server with administrator access to use it.
NWSetup lets you set up the network interface card on Novell NetWare network using only one program
from Windows 95/98/NT/2000. This program combines the following configuration steps:
• Set up Novell file server and queue on the NetWare server, instead of using NetWare utilities.
• Set up the network interface card for network printing.
●
How to install
To install NWSetup, perform the following procedure:
1.
Insert the CD-ROM into the CD-ROM drive, and double-click on [Setup.exe] in the [NWSETUP]
folder.
2.
A setup program will start. Confirm the display, and click on the [Next] button.
3.
Confirm a folder to install NWSetup. By default, the folder is C:\Program Files\NWSETUP.
When clicking on the [Next] button, necessary files are copied, and then installation is com-
pleted.
Or Install NWSetup directly from the CD-ROM as follows:
1.
Set the CD-ROM into your CD drive.
2.
Select [RUN] from the Windows [Start] menu.
3.
Type <CD-Drive>:\NWSETUP\SETUP.EXE
4.
Follow the instructions in the SETUP program.
If you are configuring for NDS (Novell Directory Services), make sure you are logged into
the correct tree and context before you initiate this program.