Konica Minolta kn303ev2 User Manual

Konica Network Interface Card INSTRUCTION MANUAL  6-3

●

NWSetup displays a list of all print servers (network interface cards) available on your network after you

start the program. The print server appears with its serial number. Once you select the print server you want

to configure, the Print Server Settings screen appears. This screen lets you set up your version of NetWare

for the print server.

The Print Server Settings are shown below. There are two Print Server Settings screens, which you need to

complete to configure the print server for NetWare. Each screen lets you set up your version of NetWare for

the print server, including directory and bindery services.

Indicates whether the NetWare print server has been enabled.

• If the box is not checked, the print server has not been enabled for NetWare. All other fields on the

screen will be shaded.

• If the box is checked, the Network Interface Card has been enabled for NetWare and you can make

entries in the other fields.

Indicates the NetWare print server name which the print server uses to log into NetWare. You can

enter a name which does not already exist in the network directory or server bindery.

The maximum field length is 48 characters.

Specifies the rate at which a print server will poll print queues for a new print job. For example, if you

place 1 in the field, the print server should poll for new print jobs every 1 second. The minimum value

for this field is 1 and the maximum is 250.

Indicates the password for a print server which will be used to log into NetWare. When you change this

field, NWSetup will set the password in both NetWare and the print server.

The maximum length for this field is 32 characters.

Both the Password and Password Retype fields must be identical before a user is allowed to Finish

this screen.

Indicates the Ethernet frame type that should be used by the NetWare protocol stack by default. Only

one frame type can be selected.