Konica Minolta 5430 DL User Manual
Status, Error, and Service Messages
122
FUSER
NOT ATTACHED
The fuser unit is not
installed.
installed.
Contact Technical Sup-
port with the error infor-
mation.
port with the error infor-
mation.
INCORRECT CART.
X
The X toner cartridge
is an unapproved
type.
is an unapproved
type.
MEDIA JAM
DUPLEX LOWER
Media has misfed in
the duplex option.
the duplex option.
Locate and remove the
misfeed.
misfeed.
MEDIA JAM
DUPLEX UPPER
Media has misfed in
the duplex option.
the duplex option.
MEDIA JAM
FUSER
Media has misfed
leaving the fuser
area.
leaving the fuser
area.
MEDIA JAM
TRANSFER ROLLER
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the paper
exit area.
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the paper
exit area.
MEDIA JAM
TRAY X
Media has misfed
while being pulled
from the specified
tray (X).
while being pulled
from the specified
tray (X).
MEDIA JAM
UNDEFINED
A media misfeed
occurred because the
printer driver settings
for duplex printing are
inconsistent (for
example, the speci-
fied paper type or size
is different from that
of the loaded paper).
occurred because the
printer driver settings
for duplex printing are
inconsistent (for
example, the speci-
fied paper type or size
is different from that
of the loaded paper).
After clearing the media
misfeed, check the
driver settings.
misfeed, check the
driver settings.
PUT MEDIA : TRAY 1
“MEDIA”
The media type set in
the printer driver is
different from the type
of media loaded into
Tray 1.
the printer driver is
different from the type
of media loaded into
Tray 1.
Load the correct media
type into Tray 1.
type into Tray 1.
This message...
means...
do this...