Konica Minolta 5430 DL User Manual
Introduction
126
Introduction
Note
Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.
KONICA MINOLTA will void your warranty.
"
This chapter provides information about the following accessories.
Note
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
are turned off and unplugged during installation.
Antistatic Protection
Note
Before opening and handling the dual in-line memory module (DIMM),
first touch a metal part of the printer to avoid an electrostatic charge
building up. When the DIMM is taken out of its conductive bag, hold it by
its edges to avoid touching the electronic circuits. When handling the
DIMM, be sure to place it on an anti-static mat or a piece of aluminum
foil.
first touch a metal part of the printer to avoid an electrostatic charge
building up. When the DIMM is taken out of its conductive bag, hold it by
its edges to avoid touching the electronic circuits. When handling the
DIMM, be sure to place it on an anti-static mat or a piece of aluminum
foil.
Dual In-Line
Memory Module
(DIMM)
Memory Module
(DIMM)
512 MB DIMM (Buffered)
Duplex Option
Auto duplexing
Lower Feeder Unit
500-sheet tray included